EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High Performance SMD LED with Reflector
93-21UYC/S530-XX/TR8 Features
․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
solder process. ․Eia std. package. ․IC compatible.
․Pb- free
Applications
․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax.
․Indicator and backlight for audio and video equipment ․Indicator and backlight for battery driven equipment. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use.
Device Selection Guide
Chip
Material Emitted Color AlGaInP
Super Yellow
Lens Color Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 1 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8
Package Dimensions
0.4±0.070.5±0.072.2±0.1Anode mark3.0±0.14.6±0.22.7±0.11.0±0.11.5±0.11.7±0.10.130.62+-0+-Polarity0.15±0.050.26±0.1For reflow soldering (propose)4.34±0.10.4±0.10.5±0.10.74±0.10.74±0.1Notes: All dimensions are in millimeters.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 2 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation
Peak Forward Current(Duty 1/10 @ 1KHZ)
VR 5 V Topr Tstg Tsol Pd
-40 ~ +85 -40~ +100 260 (for 5 second)
60
℃ ℃ ℃ mW
93-21UYC/S530-XX/TR8 IF 25 mA IFP 60 mA Electro-Optical Characteristics (Ta=25℃) Parameter
Symbol
*Chip RankA2 17
Min. Typ. Max. Unit
43
Condition
-----
A3 40 63 -----
Luminous intensity
Iv
A4 55 85 ----- A5 65 93 ----- A6 86 126 -----
mcd
If=20mA
Viewing Angle Peak Wavelength
Dominant Wavelength 2θ1/2 ----- ----- 130 ----- deg λp ----- ----- 591 λd ----- ----- 589 △λ ----- ----- 15 VF
If=20mAIf=20mAIf=20mAIf=20mAIf=20mAVr=5V
----- ----- -----
nm nm nm V
Spectrum Radiation Bandwidth Forward Voltage Reverse Current
-----
----- 2.0 2.4
IR ----- ----- ----- 10 μA
*93-21UYC/S530-XX/TR8
Chip Rank
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 3 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 4 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8
Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 5 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel.
Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging LabelAluminum moistue-proof bagDesiccantLabel Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 6 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
93-21UYC/S530-XX/TR8
Test Sample
No. Items Test Condition Ac/Rc
Hours/Cycles Size
Temp. : 260℃±5℃
6 Min. 22 PCS.0/1 1 Solder Heat Min. 5sec. H : +100℃ 15min
300 Cycles 22 PCS.0/1 2 Temperature Cycle ∫ 5 min
L : -40℃ 15min H : +100℃ 5min
3 Thermal Shock ∫ 10 sec
L : -10℃ 5min
High Temperature
Temp. : 100℃ 4
Storage
Low Temperature
Temp. : -40℃ 5
Storage 6 7
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 7 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
300 Cycles 22 PCS.1000 Hrs. 22 PCS.1000 Hrs. 22 PCS.
0/1 0/1 0/1
DC Operating Life High Temperature /
High Humidity
IF = 20 mA 85℃/ 85%RH
1000 Hrs. 22PCS. 0/1 1000 Hrs. 22 PCS.
0/1
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8 Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. started at the time of the hand solder.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 8 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYC/S530-XX/TR8 4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.3 Page: 9 of 9 Device No. : DSE-931-028 Prepared date:08-02-2004 Prepared by: Bennett
因篇幅问题不能全部显示，请点此查看更多更全内容