Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104
During routine maintenance, it became necessary to shutdown G1/0/1 on TestKing1. All other interface were up.
During this time, TestKing1 remained the active device for Vlan 102's HSRP group. You have determined that there is an issue with
the decrement value in the track command in Vlan 102's HSRP group. What need to be done to make the group function properly ?
A. The TestKing1's decrement value should be configured with a value from 5 to 15 B. The TestKing1's decrement value should be configured with a value from 9 to 15 C. The TestKing1's decrement value should be configured with a value from 11 to 18
D. The TestKing1's decrement value should be configured with a value from 195 to less than 205 E. The TestKing1's decrement value should be configured with a value from 200 to less than 205 F. The TestKing1's decrement value should be greater than 190 and less 200 Answer: C
Section: Mixed Practice Questions 4 QUESTION 403
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario.
During routine maintenance, G1/0/1 on TestKing1 was shutdown. All other interface were up.
TestKing2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on TestKing1 was reactivated. TestKing1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ?
A. Enable preempt on TestKing1's Vlan101 HSRP group B. Disable preempt on TestKing1's Vlan101 HSRP group
C. Decrease TestKing1's priority value for Vlan101 HSRP group to a value that is less than priority value configured on TestKing2's HSRP group for Vlan101
D. Decrease the decrement in the track command for TestKing1's Vlan 101 HSRP group to a value less than the value in the track command for TestKing2's Vlan 101 HSRP group.
Answer: A
Section: Mixed Practice Questions 4 QUESTION 404
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104
Note: Please refer to the TestKing#2 scenario.
TestKing2 has not become the active device for Vlan103's HSRP group even though all interfaces are active. As related to Vlan103's HSRP group. What can be done to make the group function properly ? A. On TestKing1, disable preempt
B. On TestKing1, decrease the priority value to a value less than 190 and greater than 150 C. On TestKing2, increase the priority value to a value greater 241 and less than 249
D. On TestKing2, increase the decrement value in the track command to a value greater than 10 and less than 50. Answer: C Section: Mixed Pr actice Questions 4 QUESTION 405
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario.
If G1/0/1 on TestKing1 is shutdown, what will be the current priority value of the Vlan105's group on TestKing1 ?
A.95 B.100 C.150 D.200
Answer: A
Section: Mixed Practice Questions 4 Explanation/Reference: Explanation:
Priority is configured 150, Track is 55. So, if shutdown interface G1/0/1 -> 150 - 55 = 95. QUESTION 406
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario. What is the configured priority value of the Vlan105's group on TestKing2 ?
A.50 B.100 C.150 D.200
Answer: B
Section: Mixed Practice Questions 4 Explanation/Reference: Explanation:
Use \"show stantby brieft\" command on console2 . Very easy to see priority of Vlan105 is 100. QUESTION 407
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104
Note: Please refer to the TestKing#2 scenario.
During routine maintenance, it became necessary to shutdown G1/0/1 on TestKing1 and TestKing2. All other interface were up. During this time, TestKing1 became the active device for Vlan104's HSRP group. As related to Vlan104's HSRP group. What can be done to make the group function properly ?
A. On TestKing1, disable preempt
B. On TestKing2, decrease the priority value to a value less than 150
C. On TestKing1, increase the decrement value in the track command to a value greater than 6 D. On TestKing1, disable track command.
Answer: C
Section: Mixed Practice Questions 4 Explanation/Reference: Explanation:
We should NOT disable preempt on TestKing1. By do that, you will make Vlan104's HSRP group fail function. Example: if we are disable preempt on TestKing1. It can not become active device when G1/0/1 on TestKing2 fail. In this question, G0/1/0 on TestKing1 & TestKing2 is shutdown. Vlan104 (left) : 150 - 1 = 149. Vlan104 (right) : 200 - 155 = 145. Result is priority 149 > 145 ( Vlan104 on TestKing1 is active). If increase the decrement in the track value to a value greater than 6 ( > or = 6). Vlan104 (left) : 150 - 6 = 144. Result is priority 144 < 145 ( vlan104 on TestKing2 is active).
QUESTION 408
Network topology exhibit:
Interface VLAN 101 exhibit:
Interface VLAN 102 exhibit:
Interface VLAN 104 exhibit:
Interface VLAN 105 exhibit:
You work as a network technician at TestKing.com. You study the network topology and the other exhibits carefully.
Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario. Which statement is correct about the use of the virtual interface on a WLC : A. Used to relay DHCP messages B. Used to communicate with LAPs C. Used to bring up LWAPP tunnels
D. Used to extend into the wireless client VLAN
Answer: A
Section: Mixed Practice Questions 4
因篇幅问题不能全部显示，请点此查看更多更全内容