juniper路由器配置

ist: ignore\"> 增加端口配置模板 （1）需要子接口的端口配置

set interfaces fe-2/0/1 vlan-tagging ――――在配置接口启用封装VLAN set interfaces fe-2/0/1 unit 424 vlan-id 424 ―――――配置子接口，VLAN 424 set interfaces fe-2/0/1 unit 424 family inet address 192.168.254.146/30 ――配置子接口地址 （2）无需子接口配置 set interfaces fe-2/0/23 unit 0 family inet address 222.60.11.154/29 ――直接配置地址 （3）E1口配置 set interfaces e1-3/0/0 encapsulation ppp 封装链路类型，包含PPP,HDLC，根据实际情况配置 set interfaces e1-3/0/0 e1-options framing unframed 封装帧格式，参数包含unframed,g704, g704-no-crc4 set interfaces e1-3/0/0 unit 0 family inet address 192.168.1.126/30 配置地址

（4）CE1配置 set interfaces ce1-4/0/0 clocking external set interfaces ce1-4/0/0 e1-options framing g704-no-crc4 set interfaces ce1-4/0/0 partition 1 timeslots 1-31 ――――设置信道1及时隙1－31 set interfaces ce1-4/0/0 partition 1 interface-type ds ――――子接口类型DS set interfaces ds-4/0/0:1 encapsulation ppp ―――――配置子接口封装ppp set interfaces ds-4/0/0:1 unit 0 family inet filter input NYYH set interfaces ds-4/0/0:1 unit 0 family inet address 10.238.173.197/30 ――――配置地址 （5）策略配置 set firewall filter shigonganjuMAS term 1 from source-address 10.238.173.180/30 set firewall filter shigonganjuMAS term 1 then accept set firewall filter shigonganjuMAS term 2 from source-address

10.238.173.0/24 set firewall filter shigonganjuMAS term 2 from source-address 10.238.179.0/24 set firewall filter shigonganjuMAS term 2 then discard set firewall filter shigonganjuMAS term 3 then accept set interfaces fe-2/0/0 unit 44 family inet filter input jiaotongyinhangduanxin―――将策略应用至子接口。

日常维护命令

1 查看序列号show chassis hardware 2 查看硬件show chassis hardware 3 查看软件版本show version 4 查看CPU show chassis routing-engine 5 ping命令 ping 192.168.1.254 rapid #快速ping地址

6 查看设备告警信息 show chassis alarms 7 查看详细的硬件温度及状态信息 show chassis environment 8 收集CASE需要的信息request support information