ANSI认证的ANSI个人防护用品标准介绍（ASNI107...）
发布网友
共1个回答
热心网友
ANSI/ISEA 107-2004 - American National Standard for High-Visibility Safety Apparel and Headwear Description: This standard provides a uniform,authoritative guide for the design,performance specifications,and use of high-visibility and reflective apparel including vests,jackets,bib/jumpsuit coveralls,trousers and harnesses. Garments that meet this standard can be worn 24 hours a day to provide users with a high level of conspicuity through the use of combined fluorescent and retroreflective materials.
Requirement: To comply with ANSI/ISEA 107-2004,a garment's background material,and retroreflective or combined-performance material,must be tested and certified by an independent,accredited third-party laboratory. The manufacturer of the finished item then verifies that the garment or headwear meets all the requirements of the standard,and provides a certificate of compliance for for each model.
ANSI Z87.1-2003 - American National Standard for Occupational and Ecational Eye and Face Protection Devices Description: ANSI Z87.1-2003,published in August 2003,establishes performance criteria and testing requirements for devices used to protect the eyes and face from injuries from impact,non-ionizing radiation and chemical exposure in workplaces and schools. It covers all types of protective devices,including:
· spectacles (plano and prescription)
· goggles
· faceshields
· welding helmets and handshields
· full facepiece respirators
The standard includes descriptions and general requirements,as well as criteria for testing,marking,selection,use and care. Note that it does not apply to hazardous exposure to bloodborne pathogens,X-rays,high-energy particulate radiation,microwaves,high-frequency radiation,lasers,masers,or sports.
ANSI Z.1-2003 - American National Standard for Instrial Head Protection
Description: This standard provides performance and testing requirements for instrial helmets,commonly known as hard hats. It is a revision of ANSI Z.1-1997,which established the types and classes of protective helmets,depending on the type of hazard encountered. It includes specifications for helmets designed to offer protection from lateral impact,or top-only impact,giving employers and users the flexibility to specify the helmet that best meets the needs of their specific workplace.
ANSI/ISEA 101-1996 (R2002） - American National Standard for Limited-Use and Disposable Coveralls - Size and Labeling Requirements
有限使用和一次性防护服.尺寸和标签要求
ANSI/ISEA 102-1990 (R2003） - American National Standard for Gas Detector Tubes - Short Term Type for Toxic Gases and Vapors in Working Environments
气体检测管.在工作环境中毒气和毒蒸汽的快速检测型
ANSI/ISEA 104-1998 (R2003） - American National Standard for Air Sampling Devices - Diffusive Type for Gases and Vapors in Working Environments
空气抽样装置.工作场所中气体和蒸气的扩散类型
ANSI/ISEA 105-2005 - American National Standard for Hand Protection Selection Criteria
手部保护用品选择规范
ANSI Z308.1-2003 - American National Standard - Minimum Requirements for Workplace First Aid Kits
工作场所急救工具箱的最低要求
ANSI Z358.1-2004 - American National Standard for Emergency Eyewash and Shower Equipment
应急洗眼和淋浴用设备（已经由ANSI/ISEA Z358.1 2009代替）
ANSI /ISEA Z358.1-2009 - American National Standard for Emergency Eyewash and Shower Equipment
ISEA:International Safety Equipment Assocition
最大的变化：规定洗眼器出水温度范围：16--38℃。具体标准，请咨询 ANSI Z97.1 - American National Standard For Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test
用于建筑的安全玻璃——安全性能规范和试验方法
Scope: In accordance with the scope determined by the 297 Standards Committee,this standard establishes the specifications and methods of test for the safety properties of safety glazing materials (glazing materials designed to promote safety and to rece or minimize the likelihood of cutting and piercing injuries when the glazing materials are broken by human contact) as used for all building and architectural purposes.
注：玻璃产品的ANSI Z97.1检测报告可用于申请美国玻璃协会（Safety Glazing Certification Council）的SGCC认证证书
ANSI A14.2: 2000 - American National Standard For Ladders - Portable Metal - Safety Requirements
便携式金属梯的安全要求
Description: These standards detail specifications on the materials,construction requirements,test requirements,usage guidelines and labeling/marking requirements for portable ladders. The type of material to be used is determined by the environment the finished ladder will encounter (electrical hazards,temperature extremes,corrosion,outdoor weathering,etc.). Metal ladders do not have material guidelines. ladders are generally evaluated on their resistance to bending,strength in various positions and the quality of the indivial components that make up the ladder.
Construction requirements include weight and size categories for portable ladders. Usage guidelines for portable ladders encompass selecting the proper ladder for the job being performed; inspecting prior to use to verify proper operation and cleanliness; evaluating ladder placement so that footing and top supports are secure and not creating a traffic hazard for pedestrians; utilizing proper climbing technique; and caring for and storing ladders. Ladders must be marked with ladder size,type,maximum length,number of sections (if appropriate),highest standing level,total length of sections (if applicable),model number,manufacturer's name,manufacturer's location,and date of manufacture. Usage guidelines and other warning statements must also be placed on the ladders in specific locations.
